2 inch copper fittings for pipe

Copper Threaded Male Adapter,2 inch copper fittings Sweat Solder x MPT & Sweat Solder X BSP 

• Description：Copper Threaded Male Adapter，2 inch Copper fittings,Pipe Threaded Sweat Solder x MPT Adapter C x M from 1/4″ to 4″ and 15X1/2" to 108X4"  
  Generally, Thread male pipe adapter fits outside of a copper tube, then, connects to a female threaded pipe on the other ends. The threaded part of the adapter screws into the female end of the adjoining pipe. Meanwhile, the female end of the adapter covers over the end of the copper pipe that it will need to solder to. All in all, the adapter can connect two same size pipes. But, if a change in size between the pipes; you’d better purchase two different sizes on both ends. Runde specialized in Copper Fittings since 2001,Our products can divided to ASME B16.22 copper fittings and EN1254-1 copper fittings .the quality is equal to yorkshire copper fittings,connex copper fittings.Our EN1254-1 copper fittings approved UPC and NSF61.and ASME B16.22 copper fitttings approved WRAS certificate.
  

• Production Standard: 
  1.EN1254-1:1998/BS864-2(Copper And Copper Alloys-Plumbing Fittings)
   2.ANSI/ASME B16.22-2001(Wrought Copper And Copper Alloy Solder Joint Pressure Fittings)
  3.ISO228-1 Pipe Threads Where Pressure-tight joints are not made on the threads
  4.ISO 7-1(EN10226-1&2 R,Rp,Rc) Pipe threads where presssure-tight joints are made on the threads- Part 1：Dimensions,tolerances and designation
  5.ASME B1.20.1 Pipe Threads,General Purpose(Inch)
  

• Material: C12200(Cu-DHP CW024A ，SF-Cu 2.0090 and TP2) 
  Cu≥99.95% P0.015%-0.04% Impurity(P,Ag,Bi,Sb,As,Fe,Pb,Sn,S,Zn)≤0.1 
  

• Application: Industrial or Residential Plumbing ,drinking supply,cold and hot water supply, heating supply, fire protection,gas supply, industrial petroleum pipeline system etc.
  

Product Categories : Copper Fittings > End Feed Copper Fittings