how to solder vertical copper pipe fittings

how to solder vertical copper pipe fittings

• Description:Pre-solder Reducing Copper Tee,how to solder vertical copper pipe fittings with UPC,NSF61,WRAS,SABS approval.
  solder ring copper fittings pre-filled solder around the edges of fittings.First used the coarse steel wool to clean the surface of the pipe .smear the flux paste.Then insert the pipe into the socket of fittings. a portable propane torch used to heat the socket until a ring of solder showed at the edges of the fittings.
  Runde specialized in ASME B16.22 copper fittings and EN1254-1 copper fittings since 2001 .the products can divid to wrot joint copper fittings and presolder copper fittings .the quality is equal to pegler copper fittings,IBP Fittings.Our EN1254-1 copper fittings approved UPC and NSF61.and ASME B16.22 copper fitttings approved WRAS certificate.
  1.Our Solder Ring Equal Tees are used for connecting a copper pipe to a valve or jointing two pipes to lengthen the required pipe.
  2.Suitable for use with hot/cold water and central heating systems
  3.Size:6mm~219mm/ 1/4“~8-1/8”
  

• Production Standard: 
  1.EN1254-1/BS864-2(Copper And Copper Alloys-Plumbing Fittings)
  2.ANSI/ASME B16.22-2001(Wrought Copper And Copper Alloy Solder Joint Pressure Fittings)
  

• Material: 
  Copper Part: 
  C12200(Cu-DHP CW024A ，SF-Cu 2.0090 and TP2)
  Cu≥99.95% P0.015%-0.04% Impurity(P,Ag,Bi,Sb,As,Fe,Pb,Sn,S,Zn)≤0.1
  Solder Part:   
  Sn99.3Cu0.7(Sn balance Cu0.5-0.9% Al≤0.001% Fe≤0.02% Zn≤0.001% Pb≤0.07% Ni≤0.01% Cd≤0.002% As≤0.03% Sb≤0.1% Bi≤0.1% Ag≤0.1% In≤0.1% Au≤0.05%)
  

• Packing:
  1.Packing the goods according to our customers requirements,for example bar code..
  2.Marking the cusomers' brand on the products' surfaces directly.
  3.Using Iron pallet to protect the goods from being damaged.

Product Categories : Copper Fittings > Solder Ring Copper Fittings